Skfnsk/3307 Atn9/C3//Angular Contact Ball Bearing/Rolling Bearing/Roller Bearing

• Contact Angle: 0
• Aligning: Aligning Bearing
• Separated: Separated
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 3307 ATN9/C3
• Rows Number: Multiple
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Transport Package: Wooden/Cardboard Boxes
• Specification: 35*80*34.9
• Origin: China
• HS Code: 8482103000
• Package Size: 3.50cm * 8.00cm * 3.49cm
• Package Gross Weight: 1.000kg

Product Description

The 3307 ATN9/C3 is a dual row angular contact ball bearing that corresponds to a pair of single row angular contact ball bearings in a back to back configuration in design and operation, while requiring smaller axial space. They can operate at high speeds and are more suitable for supporting large axial forces acting in both directions than deep groove ball bearings.

The following are the parameters and usage instructions for this type of bearing in general:



Parameters:

-Dimensions: Inner diameter is 35mm, outer diameter is 80mm, and width is 34.9 mm.

-Material: Common materials are chromium steel (GCr15) or stainless steel.

-Load capacity: able to withstand high radial and axial loads.

-Speed limit: The specific speed limit depends on load, lubrication, and other factors.
- Axial clearance: C3


Instructions for use:

-Installation: Before installation, ensure that the bearing seat and journal surfaces are clean and pay attention to the correct installation direction.

-Lubrication: Bearings require appropriate lubrication to reduce friction and wear, and extend their service life. Please refer to the lubrication guide and select the appropriate quantity and type of lubricant.

-Maintenance: Regularly check the condition of bearings and promptly handle any abnormalities. Depending on the usage conditions, it may be necessary to relubricate or replace the bearings.

Model	Basic Dimensions   (mm)			Basic Dynamic load rating  (kn)		Rated Speed     ( r/min)
	Inner Diameter	Outer Diameter	Width	Trends	static state	Reference speed	Limiting Speeds
3200 ATN9	10	30	14	7.61	4.3	26 000	24 000
3201 ATN9	12	32	15.9	10.1	5.6	24 000	22 000
3202 ATN9	15	35	15.9	11.2	6.8	22 000	18 000
3302 ATN9	15	42	19	15.1	9.3	18 000	16 000
3203 ATN9	17	40	17.5	14.3	8.8	19 000	16 000
3303 ATN9	17	47	22.2	21.6	12.7	17 000	14 000
3204 ATN9	20	47	20.6	20.4	12.9	16 000	14 000
3304 ATN9	20	52	22.2	24.5	15.6	13 000	13 000
3205 ATN9	25	52	20.6	22	15.3	12 000	12 000
3305 ATN9	25	62	25.4	32.5	22	11 000	11 000
3206 ATN9	30	62	23.8	30.5	22	10 000	10 000
3306 ATN9	30	72	30.2	42.5	30	10 000	9 000
3207 ATN9	35	72	27	40.5	30	9 000	9 000
3307 ATN9	35	80	34.9	54	38	8 500	8 500
3208 ATN9	40	80	30.2	48	36.5	9 000	8 000
3308 ATN9	40	90	36.5	65.5	48	7 500	7 500
3209 ATN9	45	85	30.2	52	41.5	7 500	7 500
3309 ATN9	45	100	39.7	75	53	7 500	6 700
3210 ATN9	50	90	30.2	51	42.5	8 000	7 000
3310 ATN9	50	110	44.4	95	69.5	6 000	6 000
3211 ATN9	55	100	33.3	61	52	6 300	6 300
3212 ATN9	60	110	36.5	75	64	5 600	5 600